Loading... Please wait...
show / hide sidebar

Tork Tools Guarantee

Tork Tools and Tork Tek products are 100 % guaranteed to give you the absolute top quality! Our dodge diesel tools are made from the highest quality material for durability and long life.

U.S.P.S. Shipping

Torkteknology will ship your diesel tool to you via United States Postal Service. It is safer than U.P.S. and keeps your shipping cost low.

Our Philosophy

Why spend your hard earned money on a new cummins truck when you can increase the life and performance for thousands less. Fix the few persistant problems and drive it forever. That sums up the philosophy of Tork Teknology. Drive it forever!

Comments

12 Valve Injector Puller - Tork Tool Cummins - CIP030

Tork Tools

$29.95 $25.95
(You save $4.00)
SKU:
TORK-CIP030
Availability:
Ships the same day! We ship fast!
Shipping:
$2.90 (Fixed shipping cost)
Quantity:

Need Some Advice?Speak to one of our gearheads

Product Description

CUMMINS® 12 VALVE INJECTOR REMOVER

 

* PULLS 1989 TO 1998 CUMMINS® 12 VALVE INJECTORS FAST !

* INEXPENSIVE HEAVY DUTY TOOL

* CIP030 WORKS ON 6BT AND 4BT CUMMINS® INJECTORS

 

Did you ever wish there was an easier way to remove Cummins® 5.9 0r 3.9 diesel injectors? The Tork Tool Cummins® Injector Puller is the answer to pulling stuck injectors FAST! This heavy duty tool was designed to remove Cummins® 6BT and 4BT injectors without damaging the injector ball or indent groove in the head. This tool will remove even the most rusted injector.

 

We designed this injector tool to replace the pry bar and slide hammer method. If you are not careful, the pry bar method can damage the indent groove in the head. The slide hammer is pricey and doesn't do a good job on #5 and #6 injectors. There is not enough room to use the slide hammer under the cowl.

  

GUARANTEED TO PULL YOUR CUMMINS® DIESEL INJECTORS

 

Replacement of your Dodge® Cummins® 12V diesel injector is fast and easy! To use, assemble the injector puller onto the injector. Place the tube over the injector body, followed by the hardened washer and nut. Tighten the nut and even the most stubborn injector will pop right out. GUARANTEED!

This heavy duty injector tool is made from heavy wall tube. We custom make hardened washers to fit each injector size. The hardened nuts are made for us, as off the shelf items don't exist.  We could have used cheap unhardened nuts, but chose the higher priced items, because diesel owners demand the best. This tool will last a lifetime. All parts are plated and feature a second process to keep the tool rust free.

 

THREE INJECTOR REMOVER MODELS TO CHOOSE FROM

 

The Tork Tool CIP030 Cummins® diesel injector puller will work on the large injectors from 94 to 98 and the small Cummins® injectors from 89 to 93. The CIP010 works on the small Cummins® injectors from 1989 to 93 only. The Tork Tool CIP020 is for 1994 to 98 Cummins® diesels. Detailed instructions are included in the kit.

 

QUICKLY REMOVES STUCK CUMMINS® INJECTORS !

 

All of our problem solving products feature a 45 day money back return policy. Tork Teknology guarantees, that you will pull your Cummins®injectors with our tool, or you get your money back.

Order yours today and see how easy it is, to pull your Cummins®12V injectors! 

This is what our customers are saying about the Cummins® 12 valveinjector puller:

D. Sperlak "I found it extremely useful and it made my life very easy..a great product wouldn't want to do it without it!"

L. Luther said this about the injector puller, "The puller worked wonderful!"

T. Dought had this to say, "Slick little tool. Works GREAT."

Joe Hill. "You look like you are making some high quality tools."

Vaun Johnson said this about our injector puller, " it looks like a good design that should be better on the injectors than the slide hammer method."

Big Bill had this to say, "the injector puller worked GREAT!!"

Joe Wieber uses the injector puller and loves it. "Actually i have used it on both my first gen and second gen Trucks just to try it out and it worked like a dream. it is the most simple way to pull injectors in my opinion great Product!!!" 

 

Product Reviews

Write Review

  1. 5 Star Rating

    Posted by Past Reviews on May 11th 2016

    Must be designed by an engineer. 

    Posted by Andy on 14th May 2012

    I got the tool in the mail and already pulled the injectors!!!

    I'm sure I'll need a couple more tools before it's all said and done.

    Thanks alot!




    better than Cummins special tool 

    Posted by Unknown on 28th Aug 2011

    Extracts injector very smooth even when stuck. Works very well in tight spaces and doesn't damage injector. Best tool out for injectors, keep up the great engineering.



    Pulled stuck marine injector with ease. 

    Posted by Jackson' Marina on 21st Apr 2011

    It worked great!



    Very sturdy tool! 

    Posted by Josh on 22nd Nov 2010

    Thanks for the expedited shipping of the cummins injector removal tool. i've heard alot of guys make their own, and "get by" using a 9/16 lug nut. I'll have to say its worth the money. Just got it today and looked at it. I like the "set in" design of the washer where you dont have to worry about it being centered and it looks to be of sturdy construction. Thanks again rob.

Find Similar Products by Category

Product Description

CUMMINS® 12 VALVE INJECTOR REMOVER

 

* PULLS 1989 TO 1998 CUMMINS® 12 VALVE INJECTORS FAST !

* INEXPENSIVE HEAVY DUTY TOOL

* CIP030 WORKS ON 6BT AND 4BT CUMMINS® INJECTORS

 

Did you ever wish there was an easier way to remove Cummins® 5.9 0r 3.9 diesel injectors? The Tork Tool Cummins® Injector Puller is the answer to pulling stuck injectors FAST! This heavy duty tool was designed to remove Cummins® 6BT and 4BT injectors without damaging the injector ball or indent groove in the head. This tool will remove even the most rusted injector.

 

We designed this injector tool to replace the pry bar and slide hammer method. If you are not careful, the pry bar method can damage the indent groove in the head. The slide hammer is pricey and doesn't do a good job on #5 and #6 injectors. There is not enough room to use the slide hammer under the cowl.

  

GUARANTEED TO PULL YOUR CUMMINS® DIESEL INJECTORS

 

Replacement of your Dodge® Cummins® 12V diesel injector is fast and easy! To use, assemble the injector puller onto the injector. Place the tube over the injector body, followed by the hardened washer and nut. Tighten the nut and even the most stubborn injector will pop right out. GUARANTEED!

This heavy duty injector tool is made from heavy wall tube. We custom make hardened washers to fit each injector size. The hardened nuts are made for us, as off the shelf items don't exist.  We could have used cheap unhardened nuts, but chose the higher priced items, because diesel owners demand the best. This tool will last a lifetime. All parts are plated and feature a second process to keep the tool rust free.

 

THREE INJECTOR REMOVER MODELS TO CHOOSE FROM

 

The Tork Tool CIP030 Cummins® diesel injector puller will work on the large injectors from 94 to 98 and the small Cummins® injectors from 89 to 93. The CIP010 works on the small Cummins® injectors from 1989 to 93 only. The Tork Tool CIP020 is for 1994 to 98 Cummins® diesels. Detailed instructions are included in the kit.

 

QUICKLY REMOVES STUCK CUMMINS® INJECTORS !

 

All of our problem solving products feature a 45 day money back return policy. Tork Teknology guarantees, that you will pull your Cummins®injectors with our tool, or you get your money back.

Order yours today and see how easy it is, to pull your Cummins®12V injectors! 

This is what our customers are saying about the Cummins® 12 valveinjector puller:

D. Sperlak "I found it extremely useful and it made my life very easy..a great product wouldn't want to do it without it!"

L. Luther said this about the injector puller, "The puller worked wonderful!"

T. Dought had this to say, "Slick little tool. Works GREAT."

Joe Hill. "You look like you are making some high quality tools."

Vaun Johnson said this about our injector puller, " it looks like a good design that should be better on the injectors than the slide hammer method."

Big Bill had this to say, "the injector puller worked GREAT!!"

Joe Wieber uses the injector puller and loves it. "Actually i have used it on both my first gen and second gen Trucks just to try it out and it worked like a dream. it is the most simple way to pull injectors in my opinion great Product!!!" 

 

Product Reviews

Write Review

  1. 5 Star Rating

    Posted by Past Reviews on May 11th 2016

    Must be designed by an engineer. 

    Posted by Andy on 14th May 2012

    I got the tool in the mail and already pulled the injectors!!!

    I'm sure I'll need a couple more tools before it's all said and done.

    Thanks alot!




    better than Cummins special tool 

    Posted by Unknown on 28th Aug 2011

    Extracts injector very smooth even when stuck. Works very well in tight spaces and doesn't damage injector. Best tool out for injectors, keep up the great engineering.



    Pulled stuck marine injector with ease. 

    Posted by Jackson' Marina on 21st Apr 2011

    It worked great!



    Very sturdy tool! 

    Posted by Josh on 22nd Nov 2010

    Thanks for the expedited shipping of the cummins injector removal tool. i've heard alot of guys make their own, and "get by" using a 9/16 lug nut. I'll have to say its worth the money. Just got it today and looked at it. I like the "set in" design of the washer where you dont have to worry about it being centered and it looks to be of sturdy construction. Thanks again rob.

Questions & Phone Orders

 

Shop with Confidence

Shop with Confidence

We take great pride in offering a safe and secure online shopping experience.

  • Paypal
  • Visa
  • MasterCard
  • AmericanExpress
  • Solo
45 Day Moneyback Guarantee

45 Day Moneyback Guarantee

You may return any Tork Tek or Tork Tool within 45 days of your purchase.

Tork Tool Valve Spring Compressor CVSC020
Tork Tek Overflow Valve OFV010
Tork Tool-Cummins Injection Pump Gear Puller VE P7100 VP44 CGP010
Tork Tool Valve Spring Compressor CVSC010
Tork Tool Valve Spring Compressor CVSC020
Tork Tek Overflow Valve OFV010
Tork Tool Cummins Injection Pump-Gear Puller VE P7100 VP44 CGP010
Tork Tool Valve Spring Compressor CVSC010

Back to Top