Below are the available bulk discount rates for each individual item when you purchase a certain amount
CUMMINS VALVE SPRING COMPRESSOR
FOR THE 24V 5.9 and 6.7
NEW Second generation design has upgraded HD stud and nut.
The hardened grade 8 stud is now 6% larger and 1/4"
longer and produces higher clamping forces.
Changing to performance valve springs, seals or retainers on your Cummins 24V is as easy as it gets with this tool.
The new CVSC010 is one slick tool! Before we start designing a new tool, we first look at what's out there in the market place. Our goal is to improve the design so it functions better and offer it for less money. It just doesn't make sense to duplicate a design that could be improved!
We found a very expensive tool that retails for $149.99. We didn't like the fact that you could lose the keepers if they fell through the slot. The Cummins tool was also pricey and needed a design revision. It was just too thin to hold the keepers while you install them.
The Cummins Valve Spring Compressor (CVSC010) by Tork Tools, features a tapered design, that reduces the chance of losing a valve keeper. There is nothing more frustrating than losing a valve keeper, especially when you need your Dodge Cummins 24V for work on Monday morning.
The improved heavy duty design replaces the thin torch cut tool of the past. The tapered bore creates a cavity for easy manipulation of the keepers onto the valve stem. Our design also features an aluminum top plate so your magnetic pencil doesn't stick to the tool.
The bridge places the threaded stud directly on the center line of the injector bore. This design feature applies equal force on all four valve springs. Changing your Cummins 24 valve springs is now an easy Saturday project.
Included in the Tork Tool kit are hex head bolts for the bridge, custom machined bridge, compressor plate, and hardened washer and flange nut. Detailed instruction are included also. Get your Cummins Valve Spring Compressor today and see how easy it is to change your Cummins valve springs!
Posted by RAWilliams on 29th Jun 2012
This tool works amazingly well. I was concerned at first about it being aluminum, and compressing 4, 110 pound springs. It had no problem handling that job at all.
Posted by Brandon on 7th Jan 2012
Very solid tool. The "bowls" on the compression plate were deep enough to retain the valve keepers without a doubt. The aluminum plate helps reduce the number items you have to wrestle with. Overall great quality tool!
Posted by Evan at MRI on 31st May 2011
I bought a thin plasma cut compressor last year and never really liked it. My mag pencil always sticks to the steel.( yours doesn't) I can chage out a set of performance valve springs much quicker and make more money on the job.
Posted by Mike on 31st May 2011
I bought this compressor to change out the springs on my 2005 ram. This thing is machined perfectly and works GREAT. The best spring compressor I have ever used!