Below are the available bulk discount rates for each individual item when you purchase a certain amount
* PULLS 1994 TO 1998 CUMMINS INJECTORS FAST !
* QUICKLY REMOVES STUCK INJECTORS !
* INEXPENSIVE HEAVY DUTY INJECTOR TOOL
We designed this injector tool to replace the pry bar and slide hammer method. If you are not careful, the pry bar method can damage the indent groove in the head. The slide hammer is pricey and doesn't do a good job on #5 and #6 injectors. There is not enough room to use the slide hammer under the cowl.
GUARANTEED TO PULL YOUR CUMMINS INJECTORS
Replacement of a Dodge diesel injector is fast and easy! To use, assemble the injector puller onto the injector. Place the tube over the injector body, followed by the hardened washer and nut. Tighten the nut and even the most stubborn injector will pop right out. GUARANTEED!
This heavy duty injector tool is made from heavy wall tube. We custom make hardened washers to fit each injector size. The hardened nuts are made for us, as off the shelf items don't exist. We could have used cheap unhardened nuts, but chose the higher priced items, because diesel owners demand the best. This tool will last a lifetime. All parts are plated and feature a second process to keep the tool rust free.
THREE MODELS TO CHOOSE FROM
The Tork Tool CIP020 Cummins injector puller will work on the large injectors from 94 to 98. The CIP010 works on the small injectors from 1989 to 93 only. The Tork Tool CIP030 is for 1989 to 98 Cummins diesel engines. (both large and small injectors) Detailed instructions are included in the kit.
All of our problem solving products feature a 45 day money back return policy. Tork Teknology guarantees, that you will pull your Cummins injectors with our tool, or you get your money back.
Order yours today and see how easy it is, to remove your Cummins injectors!
This is what our customers are saying about the Cummins injector puller:
D. Sperlak "I found it extremely useful and it made my life very easy..a great product wouldn't want to do it without it!"
Joe Wieber uses the injector CIP030 puller and loves it. "Actually i have used it on both my first gen and second gen Trucks just to try it out and it worked like a dream. it is the most simple way to pull injectors in my opinion great Product!!!"
Big Bill had this to say, "the injector puller worked GREAT!!"
L. Luther said this about the injector puller, "The puller worked wonderful!"
Joe Hill. "You look like you are making some high quality tools."
T. Dought had this to say, "Slick little tool. Works GREAT."
THIS HANDY GUIDE WILL ASSIST YOU IN SELECTING THE RIGHT CUMMINS INJECTOR PULLER
Tork Teknology article number one, on the Cummins fuel system and lift pump, is done. Feel free to share the link with your diesel friends. We made hundreds of tests on the P7100 fuel system and the information is available to you, for free!
Click this link for the Tork Teknology, Cummins Injector Puller instructions:
Tork Teknology 2010
Posted by Kelly on 18th Jul 2011
I finally used my Tork Tool Cummins Injector Pulling Tool. I am not,as a rule mechanically inclined, but I have to say that this tool is as handy as a shirt pocket and almost as easy to use! Thank you!
Posted by Atlantis Charter on 4th Nov 2010
I was able to remove all six of my injectors using the tool in less then 15 minutes. Great tool good value for the money. The shipping of the tool was outstanding.
Posted by Unknown on 27th Oct 2010
After receiving our new Tork Tool for a 5.9 Cummings, it took less than 5 mins to take out a stuck injector. Worth the money.