Loading... Please wait...
show / hide sidebar

Tork Tools Guarantee

Tork Tools and Tork Tek products are 100 % guaranteed to give you the absolute top quality! Our dodge diesel tools are made from the highest quality material for durability and long life.

U.S.P.S. Shipping

Torkteknology will ship your diesel tool to you via United States Postal Service. It is safer than U.P.S. and keeps your shipping cost low.

Our Philosophy

Why spend your hard earned money on a new cummins truck when you can increase the life and performance for thousands less. Fix the few persistant problems and drive it forever. That sums up the philosophy of Tork Teknology. Drive it forever!

Comments

1st Gen 1989 to 1993 Cummins Injector Puller Tool - CIP010

Tork Tools

$19.95 $17.95
(You save $2.00)
SKU:
TORK-CIP010
Shipping:
$2.65 (Fixed shipping cost)
Quantity:

Need Some Advice?Speak to one of our gearheads

Product Description

CUMMINS® INJECTOR

REMOVER TOOL

CIP010

 

* REMOVES 1989 TO 1993 CUMMINS® 5.9 INJECTORS FAST !
* QUICKLY REMOVES STUCK INJECTORS!
* THREE MODELS TO CHOOSE FROM

 

Did you ever wish there was an easier way to remove Cummins® 12V injectors? The Tork Tool Injector Puller is the answer to removing stuck injectors FAST! This heavy duty tool was designed to remove Cummins®5.9 injectors without damaging the injector ball or indent groove in the head. This tool will remove even the most rusted injectors.

We designed this handy tool to replace the pry bar and slide hammer method. If you are not careful, the pry bar method can damage the indent groove in the head. The slide hammer is pricey and doesn't do a good job on #5 and #6 injectors. There is not enough room to use the slide hammer under the cowl.

Replacement of a Dodge® Cummins® 12 valve diesel injector is fast and easy! To use, assemble the injector puller onto the injector. Place the tube over the injector body, followed by the hardened washer and nut. Tighten the nut and even the most stubborn injector will pop right out. GUARANTEED!

 

TORK TOOL CIP010

INEXPENSIVE HEAVY DUTY TOOL

 

This heavy duty tool is made from heavy wall tube. We custom machine hardened washers to fit each injector size. The Cummins® first gen injectors are 12MM thread. The hardened nuts are made for us, as off the shelf items don't exist.  We could have used cheap unhardened nuts, but chose the higher priced items, because diesel owners demand the best. This tool will last a lifetime. All parts are plated and feature a second plating the process to keep the tool rust free.

The CIP010 injector puller will pull the small injectors from the Cummins® 89 to 93 only. The CIP020 works on the large injectors from 1994 to 98. The CIP030 is for 1989 to 98 Cummins® diesel engines with small and large injectors. Detailed instructions are included in the kit.

 

GUARANTEED TO PULL YOUR CUMMINS® INJECTORS

 

All of our problem solving products feature a 45 day money back return policy. We guarantee that you will pull your injectors with our tool or you get your money back. Tork Teknology 100% satisfaction guarantee.

This is what our customers are saying about the Cummins® injector puller:

Joe Wieber uses the injector puller and loves it. "Actually i have used it on both my first gen and second gen Trucks just to try it out and it worked like a dream. it is the most simple way to pull injectors in my opinion great Product!!!" 

D. Sperlak "I found it extremely useful and it made my life very easy..a great product wouldn't want to do it without it!"

Big Bill had this to say, "the injector puller worked GREAT!!"

L. Luther said this about the injector puller, "The puller worked wonderful!"

Joe Hill. "You look like you are making some high quality tools."

 

Product Reviews

Write Review

  1. 5 Star Rating

    Posted by Past Reviews on May 11th 2016

    Injectors out in five minutes flat 

    Posted by Anthony Funk on 26th Nov 2012

    Got the package today and that shorter one worked very well. Thanks a bunch for your awesome support. Got the injectors out in 5 minutes flat.

Find Similar Products by Category

Product Description

CUMMINS® INJECTOR

REMOVER TOOL

CIP010

 

* REMOVES 1989 TO 1993 CUMMINS® 5.9 INJECTORS FAST !
* QUICKLY REMOVES STUCK INJECTORS!
* THREE MODELS TO CHOOSE FROM

 

Did you ever wish there was an easier way to remove Cummins® 12V injectors? The Tork Tool Injector Puller is the answer to removing stuck injectors FAST! This heavy duty tool was designed to remove Cummins®5.9 injectors without damaging the injector ball or indent groove in the head. This tool will remove even the most rusted injectors.

We designed this handy tool to replace the pry bar and slide hammer method. If you are not careful, the pry bar method can damage the indent groove in the head. The slide hammer is pricey and doesn't do a good job on #5 and #6 injectors. There is not enough room to use the slide hammer under the cowl.

Replacement of a Dodge® Cummins® 12 valve diesel injector is fast and easy! To use, assemble the injector puller onto the injector. Place the tube over the injector body, followed by the hardened washer and nut. Tighten the nut and even the most stubborn injector will pop right out. GUARANTEED!

 

TORK TOOL CIP010

INEXPENSIVE HEAVY DUTY TOOL

 

This heavy duty tool is made from heavy wall tube. We custom machine hardened washers to fit each injector size. The Cummins® first gen injectors are 12MM thread. The hardened nuts are made for us, as off the shelf items don't exist.  We could have used cheap unhardened nuts, but chose the higher priced items, because diesel owners demand the best. This tool will last a lifetime. All parts are plated and feature a second plating the process to keep the tool rust free.

The CIP010 injector puller will pull the small injectors from the Cummins® 89 to 93 only. The CIP020 works on the large injectors from 1994 to 98. The CIP030 is for 1989 to 98 Cummins® diesel engines with small and large injectors. Detailed instructions are included in the kit.

 

GUARANTEED TO PULL YOUR CUMMINS® INJECTORS

 

All of our problem solving products feature a 45 day money back return policy. We guarantee that you will pull your injectors with our tool or you get your money back. Tork Teknology 100% satisfaction guarantee.

This is what our customers are saying about the Cummins® injector puller:

Joe Wieber uses the injector puller and loves it. "Actually i have used it on both my first gen and second gen Trucks just to try it out and it worked like a dream. it is the most simple way to pull injectors in my opinion great Product!!!" 

D. Sperlak "I found it extremely useful and it made my life very easy..a great product wouldn't want to do it without it!"

Big Bill had this to say, "the injector puller worked GREAT!!"

L. Luther said this about the injector puller, "The puller worked wonderful!"

Joe Hill. "You look like you are making some high quality tools."

 

Product Reviews

Write Review

  1. 5 Star Rating

    Posted by Past Reviews on May 11th 2016

    Injectors out in five minutes flat 

    Posted by Anthony Funk on 26th Nov 2012

    Got the package today and that shorter one worked very well. Thanks a bunch for your awesome support. Got the injectors out in 5 minutes flat.

Find Similar Products by Category

Questions & Phone Orders

 

Shop with Confidence

Shop with Confidence

We take great pride in offering a safe and secure online shopping experience.

  • Paypal
  • Visa
  • MasterCard
  • AmericanExpress
  • Solo
45 Day Moneyback Guarantee

45 Day Moneyback Guarantee

You may return any Tork Tek or Tork Tool within 45 days of your purchase.

Tork Tool Valve Spring Compressor CVSC020
Tork Tek Overflow Valve OFV010
Tork Tool-Cummins Injection Pump Gear Puller VE P7100 VP44 CGP010
Tork Tool Valve Spring Compressor CVSC010
Tork Tool Valve Spring Compressor CVSC020
Tork Tek Overflow Valve OFV010
Tork Tool Cummins Injection Pump-Gear Puller VE P7100 VP44 CGP010
Tork Tool Valve Spring Compressor CVSC010

Back to Top