Site Information

 Loading... Please wait...

Instructions for Cummins Gear Puller CGP010

Instructions for  Cummins Gear Puller CGP010

Before using the CGP010 gear puller, apply grease to the backside of the flange bolt head and oil the threads.

Make certain that you apply equal force on both bolts!

In order to give detailed directions on all three injection pumps, it would require 20 to 30 pages of instructions. Please refer to these links and videos for the proper removal of the injection pump gear.

VE Pump Gear The Bosch VE pump is used on the 1989 to 93 Dodge Cummins 12V 6BTA and many of the 4BTA engines. Please refer to these links for step by step instructions. It is very important that the directions are followed, otherwise you may drop a shaft key into the crank and cam gears or into the oil pan.

You Tube Videos by ihartmacz.

Part 2 of a video on replacing the VE injection pump.

P7100 Pump GearThe Bosch P7100 is often called the king of injection pumps. It is used on the Dodge Cummins 12V 6BTA from 1994 to 98, the Cummins 8.3L and many industrial/motorhome engines. This article is a technical service bulletin that details the removal and timing of the pump.

VP44 Pump GearThe VP44 injection pump has been a problem child for Bosch. It was installed on the Cummins ISB 24V from 1998.5 to 2002. Most of these pumps have required a rebuild because of low fuel pressure and delivery from the stock lift pump.

You Tube Videos. These are excellent how to videos by dieseldanmac.

Part 1 of 5



Part 2 of 5



Part 3 of 5

Return the CGP010 to the reclosable vinyl bag.