CUMMINS INJECTOR PULLER

 

 

 

* PULLS 1989 TO 1998 CUMMINS INJECTORS FAST !

 

* INEXPENSIVE HEAVY DUTY TOOL

 

 

* CIP030 WORKS ON 6BT AND 4BT CUMMINS INJECTORS

 

 

 

Did you ever wish there was an easier way to remove Cummins diesel injectors? The Tork Tool Cummins Injector Puller is the answer to pulling stuck injectors FAST! This heavy duty tool was designed to remove Cummins 6BT and 4BT injectors without damaging the injector ball or indent groove in the head. This tool will remove even the most rusted injector.

 

 

We designed this injector tool to replace the pry bar and slide hammer method. If you are not careful, the pry bar method can damage the indent groove in the head. The slide hammer is pricey and doesn't do a good job on #5 and #6 injectors. There is not enough room to use the slide hammer under the cowl.

 

 

         GUARANTEED TO PULL YOUR CUMMINS DIESEL INJECTORS

 

Replacement of a Dodge diesel injector is fast and easy! To use, assemble the injector puller onto the injector. Place the tube over the injector body, followed by the hardened washer and nut. Tighten the nut and even the most stubborn injector will pop right out. GUARANTEED!

 

 

This heavy duty injector tool is made from heavy wall tube. We custom make hardened washers to fit each injector size. The hardened nuts are made for us, as off the shelf items don't exist.  We could have used cheap unhardened nuts, but chose the higher priced items, because diesel owners demand the best. This tool will last a lifetime. All parts are plated and feature a second process to keep the tool rust free.

 

 

                          THREE MODELS TO CHOOSE FROM

 

The Tork Tool CIP030 Cummins diesel injector puller will work on the large injectors from 94 to 98 and the small injectors from 89 to 93. The CIP010 works on the small injectors from 1989 to 93 only. The Tork Tool CIP020 is for 1994 to 98 Cummins diesels. Detailed instructions are included in the kit.

 

                              QUICKLY REMOVES STUCK INJECTORS !

 

All of our problem solving products feature a 45 day money back return policy. Tork Teknology guarantees, that you will pull your Cummins injectors with our tool, or you get your money back.

 

Order yours today and see how easy it is, to pull your Cummins injectors! 

 

 

This is what our customers are saying about the Cummins injector puller:

 

 

D. Sperlak "I found it extremely useful and it made my life very easy..a great product wouldn't want to do it without it!"

 

 

L. Luther said this about the injector puller, "The puller worked wonderful!"

 

 

T. Dought had this to say, "Slick little tool. Works GREAT."

 

 

Joe Hill. "You look like you are making some high quality tools."

 

Vaun Johnson said this about our injector puller, " it looks like a good design that should be better on the injectors than the slide hammer method."

Big Bill had this to say, "the injector puller worked GREAT!!"

Joe Wieber uses the injector puller and loves it. "Actually i have used it on both my first gen and second gen Trucks just to try it out and it worked like a dream. it is the most simple way to pull injectors in my opinion great Product!!!" 

 

Tork Teknology article number one, on the Cummins fuel system and lift pump, is done. Feel free to share the link with your diesel friends. We made hundreds of tests on the P7100 fuel system and the information is available to you, for free!

Tork Teknolgogy Article Series - The Cummins Lift Pump

 

 

Use this link for the Tork Teknology Cummins Injector Puller instructions

 

Do you need help in selecting the right Cummins Injector Removal Tool ?

 

 

Tork Teknology 2010