Loading... Please wait...
show / hide sidebar

Tork Tools Guarantee

Tork Tools and Tork Tek products are 100 % guaranteed to give you the absolute top quality! Our dodge diesel tools are made from the highest quality material for durability and long life.

U.S.P.S. Shipping

Torkteknology will ship your diesel tool to you via United States Postal Service. It is safer than U.P.S. and keeps your shipping cost low.

Our Philosophy

Why spend your hard earned money on a new cummins truck when you can increase the life and performance for thousands less. Fix the few persistant problems and drive it forever. That sums up the philosophy of Tork Teknology. Drive it forever!

Comments

2nd Gen 1994 to 1998 Cummins Injector Puller Tool - CIP020

Tork Tools

$22.99 $21.75
(You save $1.24)
SKU:
TORK-CIP020
Availability:
Your order ships the same day!
Shipping:
$2.40 (Fixed shipping cost)
Quantity:

Need Some Advice?Speak to one of our gearheads

Product Description

CUMMINS® 12V INJECTOR PULLERTOOL

 

* PULLS 1994 TO 1998 CUMMINS® INJECTORS FAST !

* QUICKLY REMOVES STUCK INJECTORS !

* INEXPENSIVE HEAVY DUTY INJECTOR TOOL

 

Did you ever wish there was an easier way to remove Cummins® 12 valve 5.9injectors? The Tork Tool Cummins® Injector Puller is the answer to pulling stuck injectors FAST! This heavy duty tool was designed to remove Cummins® 12V  diesel injectors without damaging the injector ball or indent groove in the head. This tool will remove even the most rusted injectors.

We designed this injector remover tool to replace the pry bar and slide hammer method. If you are not careful, the pry bar method can damage the indent groove in the head. The slide hammer is pricey and doesn't do a good job on #5 and #6 injectors. There is not enough room to use the slide hammer under the cowl.

 

GUARANTEED TO PULL YOUR CUMMINS® 12V INJECTORS

 

Replacement of a Dodge® Cummins® diesel injector is fast and easy! To use, assemble the injector puller onto the injector. Place the tube over the injector body, followed by the hardened washer and nut. Tighten the nut and even the most stubborn Cummins® injector will pop right out. GUARANTEED!

This heavy duty injector tool is made from heavy wall tube. We custom make hardened washers to fit each injector size. The hardened nuts are made for us, as off the shelf items don't exist.  We could have used cheap unhardened nuts, but chose the higher priced items, because diesel owners demand the best. This tool will last a lifetime. All parts are plated and feature a second process to keep the tool rust free.

 

THREE INJECTOR PULLER MODELS TO CHOOSE FROM

 

The Tork Tool CIP020 Cummins® injector puller will work on the large injectors from 94 to 98. The second gen Cummins® injectors have a 14MM x 1.5 thread. The CIP010 works on the small injectors (12MM) from 1989 to 93 only. The Tork Tool CIP030 is for 1989 to 98 Cummins® diesel engines. (both large and small injectors) Detailed instructions are included in the kit.

All of our problem solving products feature a 45 day money back return policy. Tork Teknology guarantees, that you will pull your Cummins® injectors with our tool, or you get your money back.

Order yours today and see how easy it is, to remove your Cummins® injectors! 

 

 

This is what our customers are saying about the Cummins® remover tool

D. Sperlak "I found it extremely useful and it made my life very easy..a great product wouldn't want to do it without it!"

Joe Wieber uses the injector CIP030 puller and loves it. "Actually i have used it on both my first gen and second gen Trucks just to try it out and it worked like a dream. it is the most simple way to pull injectors in my opinion great Product!!!" 

Big Bill had this to say, "the injector puller worked GREAT!!"

L. Luther said this about the injector puller, "The puller worked wonderful!"

Joe Hill. "You look like you are making some high quality tools."

T. Dought had this to say, "Slick little tool. Works GREAT."

 

Product Reviews

Write Review

  1. 5 Star Rating

    Posted by Past Reviews on May 11th 2016

    CIP020 Injector Puller 

    Posted by Lawrence on 29th Aug 2015

    Ordered the tool which was shipped 8/26/15. It arrived afternoon 8/29. It performed very well. In short time the injectors were out, marked and ready to be sent for rebuilding. Your product and shipping cost are very reasonable. Will definitely refer others to you.



    SUPER EASY TO USE!! 

    Posted by Kelly on 18th Jul 2011

    I finally used my Tork Tool Cummins Injector Pulling Tool. I am not,as a rule mechanically inclined, but I have to say that this tool is as handy as a shirt pocket and almost as easy to use! Thank you!



    Great tool! 

    Posted by Atlantis Charter on 4th Nov 2010

    I was able to remove all six of my injectors using the tool in less then 15 minutes. Great tool good value for the money. The shipping of the tool was outstanding.



    What a tool!!! 

    Posted by Unknown on 27th Oct 2010

    After receiving our new Tork Tool for a 5.9 Cummings, it took less than 5 mins to take out a stuck injector. Worth the money.

    Thanks again
    Mark- Georgia

Find Similar Products by Category

Product Description

CUMMINS® 12V INJECTOR PULLERTOOL

 

* PULLS 1994 TO 1998 CUMMINS® INJECTORS FAST !

* QUICKLY REMOVES STUCK INJECTORS !

* INEXPENSIVE HEAVY DUTY INJECTOR TOOL

 

Did you ever wish there was an easier way to remove Cummins® 12 valve 5.9injectors? The Tork Tool Cummins® Injector Puller is the answer to pulling stuck injectors FAST! This heavy duty tool was designed to remove Cummins® 12V  diesel injectors without damaging the injector ball or indent groove in the head. This tool will remove even the most rusted injectors.

We designed this injector remover tool to replace the pry bar and slide hammer method. If you are not careful, the pry bar method can damage the indent groove in the head. The slide hammer is pricey and doesn't do a good job on #5 and #6 injectors. There is not enough room to use the slide hammer under the cowl.

 

GUARANTEED TO PULL YOUR CUMMINS® 12V INJECTORS

 

Replacement of a Dodge® Cummins® diesel injector is fast and easy! To use, assemble the injector puller onto the injector. Place the tube over the injector body, followed by the hardened washer and nut. Tighten the nut and even the most stubborn Cummins® injector will pop right out. GUARANTEED!

This heavy duty injector tool is made from heavy wall tube. We custom make hardened washers to fit each injector size. The hardened nuts are made for us, as off the shelf items don't exist.  We could have used cheap unhardened nuts, but chose the higher priced items, because diesel owners demand the best. This tool will last a lifetime. All parts are plated and feature a second process to keep the tool rust free.

 

THREE INJECTOR PULLER MODELS TO CHOOSE FROM

 

The Tork Tool CIP020 Cummins® injector puller will work on the large injectors from 94 to 98. The second gen Cummins® injectors have a 14MM x 1.5 thread. The CIP010 works on the small injectors (12MM) from 1989 to 93 only. The Tork Tool CIP030 is for 1989 to 98 Cummins® diesel engines. (both large and small injectors) Detailed instructions are included in the kit.

All of our problem solving products feature a 45 day money back return policy. Tork Teknology guarantees, that you will pull your Cummins® injectors with our tool, or you get your money back.

Order yours today and see how easy it is, to remove your Cummins® injectors! 

 

 

This is what our customers are saying about the Cummins® remover tool

D. Sperlak "I found it extremely useful and it made my life very easy..a great product wouldn't want to do it without it!"

Joe Wieber uses the injector CIP030 puller and loves it. "Actually i have used it on both my first gen and second gen Trucks just to try it out and it worked like a dream. it is the most simple way to pull injectors in my opinion great Product!!!" 

Big Bill had this to say, "the injector puller worked GREAT!!"

L. Luther said this about the injector puller, "The puller worked wonderful!"

Joe Hill. "You look like you are making some high quality tools."

T. Dought had this to say, "Slick little tool. Works GREAT."

 

Product Reviews

Write Review

  1. 5 Star Rating

    Posted by Past Reviews on May 11th 2016

    CIP020 Injector Puller 

    Posted by Lawrence on 29th Aug 2015

    Ordered the tool which was shipped 8/26/15. It arrived afternoon 8/29. It performed very well. In short time the injectors were out, marked and ready to be sent for rebuilding. Your product and shipping cost are very reasonable. Will definitely refer others to you.



    SUPER EASY TO USE!! 

    Posted by Kelly on 18th Jul 2011

    I finally used my Tork Tool Cummins Injector Pulling Tool. I am not,as a rule mechanically inclined, but I have to say that this tool is as handy as a shirt pocket and almost as easy to use! Thank you!



    Great tool! 

    Posted by Atlantis Charter on 4th Nov 2010

    I was able to remove all six of my injectors using the tool in less then 15 minutes. Great tool good value for the money. The shipping of the tool was outstanding.



    What a tool!!! 

    Posted by Unknown on 27th Oct 2010

    After receiving our new Tork Tool for a 5.9 Cummings, it took less than 5 mins to take out a stuck injector. Worth the money.

    Thanks again
    Mark- Georgia

Find Similar Products by Category

Questions & Phone Orders

 

Shop with Confidence

Shop with Confidence

We take great pride in offering a safe and secure online shopping experience.

  • Paypal
  • Visa
  • MasterCard
  • AmericanExpress
  • Solo
45 Day Moneyback Guarantee

45 Day Moneyback Guarantee

You may return any Tork Tek or Tork Tool within 45 days of your purchase.

Tork Tool Valve Spring Compressor CVSC020
Tork Tek Overflow Valve OFV010
Tork Tool-Cummins Injection Pump Gear Puller VE P7100 VP44 CGP010
Tork Tool Valve Spring Compressor CVSC010
Tork Tool Valve Spring Compressor CVSC020
Tork Tek Overflow Valve OFV010
Tork Tool Cummins Injection Pump-Gear Puller VE P7100 VP44 CGP010
Tork Tool Valve Spring Compressor CVSC010

Back to Top