Loading... Please wait...
show / hide sidebar

Tork Tools Guarantee

Tork Tools and Tork Tek products are 100 % guaranteed to give you the absolute top quality! Our dodge diesel tools are made from the highest quality material for durability and long life.

U.S.P.S. Shipping

Torkteknology will ship your diesel tool to you via United States Postal Service. It is safer than U.P.S. and keeps your shipping cost low.

Our Philosophy

Why spend your hard earned money on a new cummins truck when you can increase the life and performance for thousands less. Fix the few persistant problems and drive it forever. That sums up the philosophy of Tork Teknology. Drive it forever!

Comments

Cummins P Pump - High Performance Overflow Valve - OFV050HP

$28.75
SKU:
TORK-OFV050HP
Availability:
WE SHIP FAST!
Shipping:
$2.49 (Fixed shipping cost)
Quantity:

Need Some Advice?Speak to one of our gearheads

Product Description

High Performance Overflow Valve for Air Dog & Fass Pump Users - OFV050HP

Increase your horsepower and fuel pressure! At full power it will raise your fuel pressure in the range of 37 to 45 psi. For use on moderately modified Cummins trucks. Works much better than the old Bosch valve with .168 inlet orifice. Now you can win at your competition event!

Product Reviews

Write Review

  1. 5 Star Rating

    Posted by Past Reviews on May 11th 2016

    85 Chevy/ Cummins Swap
    Posted by Vinnie Tabone on 19th Mar 2013

    Put a 94 cummins in my 85 Chevy. Has 4K-GS, #4 plate, intake, Exhaust, Raptor 100GPM. The truck just didn't fell like it should. Changed out the over flow with the Tork 50HP one and it feels so much better. Before it was gutless, and i was afraid it was going to die everytime i came to a stop. Now it feels and sounds like a cummins. Took 10 mins to put in and off i went. Great product. worth every penny.

    Thank you.

    Worked on my Ford/Cummins swap
    Posted by Jon Sklar on 6th Feb 2012

    Finally getting some time to sit down and thank you. Awesome product and it did exactly what i needed it to do. I built a 2006 Ford F-250 with a 12 valve p-pump swap and a 6 speed. Running a high volume electric pump, 3000 gov. springs, 0 fuel plate and 17.5 degrees of timing. The stock OFV was worthless and the injection pump just wouldn't hold pressure. Truck wouldn't rev over 1800 rpm, made no power, and would barely start after it sat over night. A 2 minute swap with your performance valve and i have great pressure at any rpm, makes great power, starts perfect every time and gets 17-20 mpg running on 35" mud terrains. i also passed this info on to the guys i bought the swap parts off of, Ford-cummins.com, and told them they should get in touch with you and include one of your valves in every one of their swap kits. thanks again!

    A Great Investment For The Right Price
    Posted by Brooks Knight on 4th Apr 2011

    I recently added a Air Dog 150 to my truck. My stock overflow valve was bypassing at 20-21 psi. So I replaced it with the OFV050HP and now my pressure stays at 29-30 all the time which is what my Air Dog is set at.

Find Similar Products by Category

Product Description

High Performance Overflow Valve for Air Dog & Fass Pump Users - OFV050HP

Increase your horsepower and fuel pressure! At full power it will raise your fuel pressure in the range of 37 to 45 psi. For use on moderately modified Cummins trucks. Works much better than the old Bosch valve with .168 inlet orifice. Now you can win at your competition event!

Product Reviews

Write Review

  1. 5 Star Rating

    Posted by Past Reviews on May 11th 2016

    85 Chevy/ Cummins Swap
    Posted by Vinnie Tabone on 19th Mar 2013

    Put a 94 cummins in my 85 Chevy. Has 4K-GS, #4 plate, intake, Exhaust, Raptor 100GPM. The truck just didn't fell like it should. Changed out the over flow with the Tork 50HP one and it feels so much better. Before it was gutless, and i was afraid it was going to die everytime i came to a stop. Now it feels and sounds like a cummins. Took 10 mins to put in and off i went. Great product. worth every penny.

    Thank you.

    Worked on my Ford/Cummins swap
    Posted by Jon Sklar on 6th Feb 2012

    Finally getting some time to sit down and thank you. Awesome product and it did exactly what i needed it to do. I built a 2006 Ford F-250 with a 12 valve p-pump swap and a 6 speed. Running a high volume electric pump, 3000 gov. springs, 0 fuel plate and 17.5 degrees of timing. The stock OFV was worthless and the injection pump just wouldn't hold pressure. Truck wouldn't rev over 1800 rpm, made no power, and would barely start after it sat over night. A 2 minute swap with your performance valve and i have great pressure at any rpm, makes great power, starts perfect every time and gets 17-20 mpg running on 35" mud terrains. i also passed this info on to the guys i bought the swap parts off of, Ford-cummins.com, and told them they should get in touch with you and include one of your valves in every one of their swap kits. thanks again!

    A Great Investment For The Right Price
    Posted by Brooks Knight on 4th Apr 2011

    I recently added a Air Dog 150 to my truck. My stock overflow valve was bypassing at 20-21 psi. So I replaced it with the OFV050HP and now my pressure stays at 29-30 all the time which is what my Air Dog is set at.

Find Similar Products by Category

Questions & Phone Orders

 

Shop with Confidence

Shop with Confidence

We take great pride in offering a safe and secure online shopping experience.

  • Paypal
  • Visa
  • MasterCard
  • AmericanExpress
  • Solo
45 Day Moneyback Guarantee

45 Day Moneyback Guarantee

You may return any Tork Tek or Tork Tool within 45 days of your purchase.

Tork Tool Valve Spring Compressor CVSC020
Tork Tek Overflow Valve OFV010
Tork Tool-Cummins Injection Pump Gear Puller VE P7100 VP44 CGP010
Tork Tool Valve Spring Compressor CVSC010
Tork Tool Valve Spring Compressor CVSC020
Tork Tek Overflow Valve OFV010
Tork Tool Cummins Injection Pump-Gear Puller VE P7100 VP44 CGP010
Tork Tool Valve Spring Compressor CVSC010

Back to Top